ODIM Deflector Handling Davit

The ODIM Deflector Handling Davit consists of a base frame mounted on wheel suspensions which make the frame able to move from vessel side towards centre. The transverse movement is done by two hydraulic motors with planetary gears acting as a pinion and rack system.
An A-frame is mounted on top of the base frame. The A-frame can be tilted from horizontal position out to an 116° outboard angle. The pivot movement is done by two hydraulic cylinders. The A-frame is equiped with two hydraulic winches with each SWL 10 T. Each winch are able to lift the fully weight of the door.
Normally the weight of the door will be divided equally between the two winches. The rope/wire is routed from the winch over a stationary sheave in top of the A-frame towards a hinged sheave before the rope enters the door termination.
The sheave hinge enables the wire/tow to follow the direction of the rope as the door lives the davit and submerges. The sheaves are designed to let a 10 T SWL G-Hook go through.

Key benefits